Waterproof Motorcycle Motorbike

Denali 2.0 DM TriOptic LED Waterproof Motorcycle Motorbike Lighting Kit

Denali 2.0 DM TriOptic LED Waterproof Motorcycle Motorbike Lighting Kit

Denali 2.0 DM TriOptic LED Waterproof Motorcycle Motorbike Lighting Kit   Denali 2.0 DM TriOptic LED Waterproof Motorcycle Motorbike Lighting Kit

Denali 2.0 DM TriOptic LED Light Kit. High-intensity waterproof multi-beam LED lighting kit with full wiring harness and M8 mounts. The DM was designed to concentrate all 2190 lumens into a small optic to create a super compact light that is incredibly bright to look at.

These lights are the ideal solution for daytime visibility but will still outshine your typical high beam. The installed spot beam lenses create a beam that reaches a distance of 395 feet. The included flood lenses carry an official E-Mark certification and throw a beam of light 150 feet wide.

LEDs: (2X) 10 watt Cree XPL HI. Power draw: 1.6 Amps. Beam distance: (Spot) 395 feet. Pod size: 1.7" round x 2.4" deep. Hi Drive High-Intensity 10 Watt LEDs 2.0 lights feature the latest development from Cree; a new "Hi-Intensity" LED chip that features a redesigned primary optic to maximize light output through secondary optics. The "HI" series LEDs are more efficient; producing more lumens and 15% more light output without increasing power draw. TriOptic Multi-Beam Lens System 2.0 light kits include two spot lenses and two elliptical flood lenses giving you three unique beam patterns in one kit. Use two spots for maximum distance, two elliptical floods for maximum spread, or one of each for the best of both worlds. DataDim LED Dimming Technology All 2.0 light pods are equipped with a dedicated 3rd-wire dimming circuit so we can use an external signal to reliably control the intensity of the LED chip at the source. Data-Dimming eliminates unnecessary modulation of the entire circuit which is unavoidable using basic two-wire dimming.

DrySeal Submersible Waterproof Illuminated Switch Denali's beefy, completely sealed, waterproof switch was engineered from the ground up to withstand harsh out-door abuse on powersports vehicles. It's clever design can be either flush or bar mounted.

DrySeal Submersible Waterproof Light Housings In addition to moulded silicone gasket seals, Denali use a unique DrySeal construction technique that encases the wires in a potted cavity as they enter the housing. This ensures the housings are 100% watertight even when submerged underwater with the wires cut and connector removed. Impact PC Corrosion-Proof Bezels Denali's impact PC bezels are moulded in 100% polycarbonate to create an impenetrable surface that woun't rust, fade, or corrode even after taking repeated impact from rocks and debris. LiveActive Intelligent Thermal Management Denali 2.0 lights feature cutting edge LED drivers that work with their uncompromising heatsinks to manage heat levels in real time. This duo works together to ensure that Denali lights stay cool enough to maintain the maximum light output when you need it most. Chrome plated Optic Holders Denali take the extra step to chrome plate their holders to maximize reflectivity and refine the appearance to match the original chrome reflectors of your vehicles headlights. Low-Profile Mount with Stainless Steel Hardware Denali 2.0 light pods include a robust, low-profile hinge mount and stainless steel M8 mounting hardware. The low-profile hinge creates a super clean installation while maintaining maximum strength. Handlebar Switch Mount Included Denali's versatile switch design can be either flush, perch, or bar mounted to your vehicle. Denali 2.0 light kits include a 7/8" and a 1" handlebar mount to provide an integrated mounting location for the light switch right out of the box. E Mark Approved Lenses Denali 2.0 kits include E Mark approved lenses. DM Kit Contents (2X) LED light pods (2X) Spot lenses (Installed) (2X) E Mark approved Elliptical lenses (1X) HotSwap single intensity wiring harness (1X) Dryseal waterproof illuminated switch (1X) 7/8" handlebar switch mount (1X) 1" handlebar switch mount (2X) Hinge mounts with M8 stainless steel hardware (4X) Zip ties & 1x adhesive mounting square. Reviews for the Denali 2.0 DM TriOptic LED Light Kit.

The auto electrician who fitted these said "they are top quality lights". Great on unlit country roads.

Took 2 hours to fit. Fitted so only work when ignition is on. The quality feels and looks good. I also use during daylight for safety. This kit is first class; the lights are substantial and the wiring harness well made. As usual, getting the cables from one end of the bike to the other is time-consuming but worth the effort. The lights are bright and eye-catching so very functional as well as good-looking. These are my second set of Denali running lights and these come with a switch which fits on the handlebars.

Was surprised at how cheap they were for Denali's especially while including the switch. Comes with cable ties tOo. Excellent product with good instructions, small and discreet but makes me more visible to other road users during the day and increases visibility on poorly lit roads.

Seem very well made and robust. All images remain the property of SPORTSBIKESHOP LTD and may not be copied or used without prior written permission. SPORTSBIKESHOP LTD is registered in England No. The item "Denali 2.0 DM TriOptic LED Waterproof Motorcycle Motorbike Lighting Kit" is in sale since Thursday, April 8, 2021. This item is in the category "Vehicle Parts & Accessories\Motorcycle Parts\Lighting & Indicators\Display Lights".

The seller is "sportsbikeshop_ltd" and is located in Boston, Lincolnshire. This item can be shipped to United Kingdom.

  1. Brand: Denali
  2. Classic Motorcycle Part: No
  3. Colour: Black
  4. Technology: LED
  5. Intended Use: Performance Part
  6. Machine Type: Dual Sport Motorcycle
  7. Manufacturer Part Number: DENDNL.

    Denali 2.0 DM TriOptic LED Waterproof Motorcycle Motorbike Lighting Kit   Denali 2.0 DM TriOptic LED Waterproof Motorcycle Motorbike Lighting Kit